Message	Date	From	Subject
8172	2013-01-27 19:58:30	Craig Smith	For Sale ProtoBoard and PCB Construction Package
I have several high quality ProtoBoards available along with a collection of PCB circuit pads, bus strips, component mounting pads, etc. These are ideal for prototyping and building a wide variety of digital and RF circuits up into the UHF region. All of these are new and completely unused. Qty 1 PadBoard 3U by Busboard Prototype Systems. 100 x 160 mm. FR-4 board drilled on 0.1 inch centers with plated thru pads on both sides of each hole. Drilled location for 96 pin connector. Handy board for conventional leaded components and DIPs. More info at www.busboard.net. Qty 2 PadBoard 3U-thin by Busboard Prototype Systems. 100 x 160 mm. FR-4 board with square pads on 50 mil pitch for direct mounting of most all SMT components. Board is drilled every 4 pads with unplated holes. Backside is a solid copper groundplane. Ideal for prototyping and building SMT projects. More info at www.busboard.net. QTY 4 RF PadBoard. These are my favorite substrate for construction of RF projects. 4.5 by 5.75 inch FR-4 boards with unplated holes drilled on 0.1 Inch centers. Backside is solid copper groundplane. Top side has a square pad at each hole location. Easy to pick up grounds where needed from backside. Can easily construct busses and interconnects on topside with small gauge tinned solid wire. Very convenient component mounting. I�ve built several receiver and test equipment projects with these boards with excellent results. Believe I purchased them from a company called Dartec in the UK. Qty 16 small FR-4 IC pads for ICs with 0.1 inch lead spacing. These allow soldering of the ICs with extended pad for attachment of other wires, components. Variety of sizes to accommodate 8 to 16 lead ICs. Qty 12 small FR-4 IC pads for SOIC devices. These allow soldering of the SOIC IC with extended and fanned-out pads for attachment of other wires, components. Variety of sizes to accommodate 8 to 28 lead SOICs. Qty 1 small FR-4 1 by 2 inch prototype board with holes on 0.1 inch centers. Handful of assorted copper bus strips and punched pads, etc. Price for everything is $61 including USPS Priority Mail shipping to your USA address. PayPal only, please. Contact me directly via email if interested: craig@powersmith.net 73 Craig AC0DS [Non-text portions of this message have been removed]

I have several high quality ProtoBoards available along with a collection of PCB circuit pads, bus strips, component mounting pads, etc. These are ideal for prototyping and building a wide variety of digital and RF circuits up into the UHF region. All of these are new and completely unused.

Qty 1 PadBoard 3U by Busboard Prototype Systems. 100 x 160 mm. FR-4 board drilled on 0.1 inch centers with plated thru pads on both sides of each hole. Drilled location for 96 pin connector. Handy board for conventional leaded components and DIPs. More info at www.busboard.net.

Qty 2 PadBoard 3U-thin by Busboard Prototype Systems. 100 x 160 mm. FR-4 board with square pads on 50 mil pitch for direct mounting of most all SMT components. Board is drilled every 4 pads with unplated holes. Backside is a solid copper groundplane. Ideal for prototyping and building SMT projects. More info at www.busboard.net.

QTY 4 RF PadBoard. These are my favorite substrate for construction of RF projects. 4.5 by 5.75 inch FR-4 boards with unplated holes drilled on 0.1 Inch centers. Backside is solid copper groundplane. Top side has a square pad at each hole location. Easy to pick up grounds where needed from backside. Can easily construct busses and interconnects on topside with small gauge tinned solid wire. Very convenient component mounting. I�ve built several receiver and test equipment projects with these boards with excellent results. Believe I purchased them from a company called Dartec in the UK.

Qty 16 small FR-4 IC pads for ICs with 0.1 inch lead spacing. These allow soldering of the ICs with extended pad for attachment of other wires, components. Variety of sizes to accommodate 8 to 16 lead ICs.

Qty 12 small FR-4 IC pads for SOIC devices. These allow soldering of the SOIC IC with extended and fanned-out pads for attachment of other wires, components. Variety of sizes to accommodate 8 to 28 lead SOICs.

Qty 1 small FR-4 1 by 2 inch prototype board with holes on 0.1 inch centers.

Handful of assorted copper bus strips and punched pads, etc.

Price for everything is $61 including USPS Priority Mail shipping to your USA address. PayPal only, please. Contact me directly via email if interested: craig@powersmith.net

73 Craig AC0DS

[Non-text portions of this message have been removed]