EMRFD Message Archive 7786

Message Date From Subject
7786 2012-09-14 15:28:52 Bill Carver Re[4]: [emrfd] UR3IQO and the Chris' KISS mixer
My experience is very modest load sensitivity with H-mode, but haven't built and tested enough to state it catagorically. But IMHO a 3 dB pad and a low insertion loss filter (my four poles at 5.2 Mhz were about 0.6 dB) the intercept is probably almost the same  as the hybrid-coupled pair. The only hit is 3 dB highter noise figure.
 
It's like everything else in life. Is a Camaro OK or do you "need" a Corvette, Porsche OK or does it HAVE to be a Ferrari, etc.
 
Bill


 

-----Original Message-----
>