EMRFD Message Archive 2441
Message Date From Subject 2441 2008-11-24 15:31:29 Michael Dunn FREE Simulation software Below is a list of free SW. The RF ones are all new to me, and I
haven't tried them yet, so no promises. The SPICEs are all similar.
SPICEs:
- Linear Technologies Switchercad/LTSpice
- Analog Devices Multisim edition
- TI TINA
RF:
- Ansoft Designer SV
- EM3DS
- Elsie (filter design)
- and see: http://cotter.sayre.googlepages.com/home for a half-dozen more...
Michael2442 2008-11-24 16:23:50 Lasse Re: FREE Simulation software Do not forget RFSim99, a very neat linear simulator!
http://www.hydehome.demon.co.uk/anoraks.htm
Runs under Win 95-XP and schematic input, very slick!
/Lasse
Michael Dunn skrev:
> Below is a list of free SW. The RF ones are all new to me, and I
> haven't tried them yet, so no promises. The SPICEs are all similar.
>
> SPICEs:
>
> - Linear Technologies Switchercad/LTSpice
> - Analog Devices Multisim edition
> - TI TINA
>
>
> RF:
>
> - Ansoft Designer SV
> - EM3DS
> - Elsie (filter design)
> - and see: http://cotter.sayre.googlepages.com/home for a half-dozen more...
>
>
> Michael
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>2443 2008-11-24 18:46:35 Sam M Re: FREE Simulation software Also QUCS
Quite Universal Circuit Simulator
Qucs is an integrated circuit simulator which means you are able to setup a
circuit with a graphical user interface (GUI) and simulate the large-signal,
small-signal and noise behaviour of the circuit. After that simulation has
finished you can view the simulation results on a presentation page or window.
Qucs is currently developed on GNU/Linux systems using the GNU autotools. For
this reason it is very likely that Qucs runs on all kinds of Unix systems
supporting an appropriate system interface and an installed Qt® environment. It
has been verified that Qucs can be installed on GNU/Linux, Solaris 2.9, MacOS
10.3, NetBSD, FreeBSD and Cygwin (Unix emulation layer for Windows). With the
QT3/Windows Free Edition at hand Qucs is also available natively on Win32
(NT/2000/XP) systems.
http://qucs.sourceforge.net/
--
GB & 73
KA5OAI
Sam Morgan
http://linuxbasics.org
Linux, the lifetime learning experience.2444 2008-11-25 06:20:57 Eduardo Alonso Re: FREE Simulation software HELLO!
REMEMBER APLAC, IT'S THE ONLY FREE (NON COMMERCIAL)
ARMONIC SIMULATOR AVARIABLE. (QUCS IS UNDER DEVELOPMENT).
IT IS LIKE SPICE, BUT A MORE POWERFULL PLOT COMMANDS.
APLAC IS A DESIGNED IN FINDLAND AND NOW IS UNDER THE UMBRELLA
OF MICROWAVE STUDIO COMPANY.
73 FROM EDUARDO,
EA3GHS2445 2008-11-25 21:14:38 ehydra Re: FREE Simulation software Hi Eduardo -
At the moment try to learn APLAC as to have an alternative for rf
purposes (e.g. mixer analysis) to LTspice.
The first thing I learned is that APLAC is not free! The only free thing
is a student version available with limited functionality.
Are you experienced with APLAC? I feal I need a little help.
regards -
Henry
Eduardo Alonso schrieb:
> HELLO!--
>
> REMEMBER APLAC, IT'S THE ONLY FREE (NON COMMERCIAL)
> ARMONIC SIMULATOR AVARIABLE. (QUCS IS UNDER DEVELOPMENT).
> IT IS LIKE SPICE, BUT A MORE POWERFULL PLOT COMMANDS.
>
> APLAC IS A DESIGNED IN FINDLAND AND NOW IS UNDER THE UMBRELLA
> OF MICROWAVE STUDIO COMPANY.
>
> 73 FROM EDUARDO,
> EA3GHS
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
www.ehydra.dyndns.info2463 2008-11-30 02:13:10 ea3ghs FIGURE 5.6 (FET MIXER) analisys with APLAC, a free armonic simulator 2474 2008-12-08 16:38:23 ehydra Re: FIGURE 5.6 (FET MIXER) analisys with APLAC, a free armonic simul Yahoo says "The requested document is not accessible."
- Henry
ea3ghs schrieb:
>2478 2008-12-09 04:43:43 Eduardo Alonso Re: FIGURE 5.6 (FET MIXER) analisys with APLAC, a free armonic simul 2497 2008-12-12 22:27:30 ehydra Re: FIGURE 5.6 (FET MIXER) analisys with APLAC, a free armonic simul Thanks Eduardo!
I will read it.
regards -
Henry
Eduardo Alonso schrieb:
>