Message	Date	From	Subject
1119	2007-10-27 07:18:37	Hari G	Re: Interfacing Spectrum Analyzer to PC
Hi , I would like to know if any one tried interfacing the W7ZOI SA to the PC, also any ideas on getting a trigger signal form the sweep generator ?. I looked at the MSA by Scotty , being a PLL controlled design the sampling is easy for the SW. Best Regards Hari On 10/24/07, f2dc2003 <f2dc@arrl.net> wrote: Hello all, How to connect a second hand or homebuilt spectrum analyzer to a computer, in order to store on disk and/or print the spectrum displayed on the analyzer's screen? Some ideas are presented in my Web page : http://roland.cordesses.free.fr/san2pc.html where I describe a simple interface between an HP141T and a PC. A full description is available in the last issue of QEX (Nov/Dec 2007) 73 Roland F2DC -- De Hari VU2GHB

Hi ,

I would like to know if any one tried interfacing the W7ZOI SA to the PC, also any ideas on getting a trigger signal form the sweep generator ?.

I looked at the MSA by Scotty , being a PLL controlled design the sampling is easy for the SW.

Best Regards

Hari

On 10/24/07, f2dc2003 <f2dc@arrl.net> wrote:

Hello all,

How to connect a second hand or homebuilt spectrum analyzer to a
computer, in order to store on disk and/or print the spectrum
displayed on the analyzer's screen?

Some ideas are presented in my Web page :

http://roland.cordesses.free.fr/san2pc.html

where I describe a simple interface between an HP141T and a PC.

A full description is available in the last issue of QEX (Nov/Dec 2007)

73

Roland F2DC

--
De Hari
VU2GHB